Need help locating some hardware

[Echo2]

First....I need a source on the trim they use on the edge of a Kevlar ACH.....measures 3/8" ID...and about 1/2" legs....ID is the critical.....flexable rubber/PVC

Second....I need a source on a webbing anchor.....it looks similar to this.....

http://t3.gstatic.com/images?q=tbn:ANd9GcQX09pXHHLeiVDF2CqTlBYZmnbvs1sgI fZbzJBR2geyjtwjkrJ20A

but the hole is keyed to lock over a pin (similar to a nail head.... shaped like the hole.slot on the back of a power strip)

I would like for it to fir 3/4" webbing....but 1" would work....I can work with whatever pin size it uses.....metal or plastic....it's going to hold less than 1/2 lb.

Like this....but smaller...

http://t3.gstatic.com/images?q=tbn:ANd9GcQyOEe1F1lcULa0sIKIymF_T0UrlCKQr dFGduKA9xRDajP3x4CmZw

Thanks for any help

Echo2

[mitunnelrat]

There's a site... www. supplycaptain. com, I think... That may be able to help you out. I'm not sure if they'll have exactly what you're looking for, but from what I remember they have a shit ton of available parts and materials.

[Evolver]

Try here. http://www.johnhowardcompany.com/Cat-Buckles%20and%20Plastic%20Hardware.html

Or here http://www.strapworks.com/Plastic_Harware_s/18.htm

The knee pad clips are "suspender hooks". Hope this helps.

[Echo2]

I found the buckles....they are known as keyway fastners...

https://encrypted-tbn1.google.com/images?q=tbn:ANd9GcR0JIkvnVLh6jXaV2YLUw--mrnXjles7OWPF_ZQH1ypYaoqabUq

The only way I've found them is in lots of 50.....for around $25.

[Gunfixr]

You ever heard of London Bridge Trading?
They make high end web gear and such for the military and LE agencies.
Anyway, they're a local company. They set up a table at the local gun shows, and there is usually a bunch of bins with different types of hardware in them that they sell because people keep asking, and stuff left over from contract runs. I do some of my own web gear work, and have picked some stuff up over the years.
The next show is next weekend, and I will be there Sunday. I can look for something like that if you wish.

[Echo2]

You ever heard of London Bridge Trading?
They make high end web gear and such for the military and LE agencies.
Anyway, they're a local company. They set up a table at the local gun shows, and there is usually a bunch of bins with different types of hardware in them that they sell because people keep asking, and stuff left over from contract runs. I do some of my own web gear work, and have picked some stuff up over the years.
The next show is next weekend, and I will be there Sunday. I can look for something like that if you wish.

Yes.....very much yes.....Need 4pcs.....with or without pin (prefer with).

If you find something....PM me with the info and I'll we'll square up.

Thanks...:)

[Gunfixr]

Ok, will do.

[Gunfixr]

I ended up not getting to the gun show, something came up I had to take care of.
However, there is one scheduled for the weekend of Oct 13th, which I plan to attend.
I will still be on the lookout for these pieces.